TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1210 of 1318

TM 9-2320-328-13&P-1

0107-16

DRAFT

0107

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3292

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 22.

Note position of non-operating upper rear warning light.

Remove passenger side light

bezel cover (WP 0335).

Put EMERG MASTER and UPPER REAR WARNING switches

to off position (WP 0004).

Turn Service Drive Lights Off (TM 9-2320-422-10).

Disconnect operating passenger side body wire harness upper rear warning light

connector from warning light (WP 0231).

Disconnect non-operating passenger side

body wire harness upper rear warning light connector from warning light (WP 0231).

Connect non-operating upper rear warning light to operating passenger side body wire

harness connector.

Turn Service Drive Lights On (TM 9-2320-422-10).

Put EMERG

MASTER and UPPER REAR WARNING switches to on position (WP 0004).

Check if

upper rear warning light that is connected to operating passenger side body wire

harness connector operates.

.

If non-operating warning light operates when connected to operating

passenger side body wire harness connector, replace non-operating

warning light (WP 0231).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION