TM 9-2320-328-13&P-1
0107-18
DRAFT
0107
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3293
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 24.
Put EMERG MASTER and UPPER REAR WARNING switches to off position
(WP 0004).
Turn Service Drive Lights Off (TM 9-2320-422-10).
Pull battery disconnect
switch to off position (WP 0007).
Remove a non-operating upper rear warning light
(WP 0231).
Check for continuity across passenger side body wire harness wire 2740
(black) from non-operating warning light connector, terminal 1 to a known good ground.
.
If there is no continuity, go to Step 27.
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION