TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1255 of 1318

TM 9-2320-328-13&P-1

0110-11

DRAFT

0110

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3310

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 11.

Put PASS SCENE switch to off position (WP 0004).

Turn Service Passenger Lights

Off (TM 9-2320-325-14&P).

Pull battery disconnect switch to off position (WP 0007).

Remove passenger side light bezel cover (WP 0335).

Disconnect passenger side body

wire harness rear passenger side scene light connector.

Push battery disconnect

switch to on position (WP 0007).

Turn Service Drive Lights On (TM 9-2320-325-14&P).

Put PASS SCENE switch to on position (WP 0004).

With a test lead set, check for 22 to

28 VDC between wire 1697 (black) at passenger side body wire harness rear

passenger side scene light connector, terminal A and a known good ground.

.

If 22 to 28 VDC are not present, repair wire 1697 in passenger side body

wire harness if repairable (TM 9-2320-325-14&P), or replace passenger

side body wire harness (WP 0298).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION