TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1251 of 1318

TM 9-2320-328-13&P-1

0110-7

DRAFT

0110

Change 1

.

HWT2961

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 7.

Put PASS SCENE switch to off position (WP 0004).

Turn Service Drive Lights

Off (TM 9-2320-325-14&P).

Pull battery disconnect switch to off position (WP 0007).

Open passenger side stowage compartment hatch T1 (WP 0008).

Disconnect

passenger side body wire harness front passenger side scene light connector.

Push

battery disconnect switch to on position (WP 0007).

Turn Service Drive Lights On

(TM 9-2320-325-14&P).

Put PASS SCENE switch to on position (WP 0004).

With a

test lead set, check for 22 to 28 VDC between wire 1697 (black) at passenger side body

wire harness front passenger side scene light connector and a known good ground.

.

If 22 to 28 VDC are not present, go to Step 10.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION