TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1243 of 1318

TM 9-2320-328-13&P-1

0109-13/(14 blank)

DRAFT

0109

Change 1

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

Step 14.

Put STEP LIGHTS switch to off position (WP 0004).

Turn Service Drive Lights Off

(TM 9-2320-422-10).

Pull battery disconnect switch to off position (WP 0007).

With a

test lead set, check for continuity across wire 2740 (black) from passenger side body

wire harness hose bed step light connector, terminal 1 to a known good ground.

.

a.

If there is continuity, replace non-operating hose bed step

light (WP 0234).

.

b.

If there is no continuity, repair wire 2740 in passenger side body wire

harness if repairable (TM 9-2320-325-14&P), or replace passenger

side body wire harness (WP 0298).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION