TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1241 of 1318

TM 9-2320-328-13&P-1

0109-11

DRAFT

0109

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3285

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 12.

Put STEP LIGHTS switch to off position (WP 0004).

Turn Service Drive Lights

Off (TM 9-2320-422-10).

Pull battery disconnect switch to off position (WP 0007).

Connect main wire harness driver side body wire harness connector.

Disconnect

passenger side wire harness 12-pin connector.

Push battery disconnect switch to on

position (WP 0007).

Turn Service Drive Lights On (TM 9-2320-422-10).

Put STEP

LIGHTS switch to on position (WP 0004).

With a test lead set, check for 22 to 28 VDC

between wire 1615 (green) from passenger side body wire harness 12-pin connector,

terminal 5 to a known good ground.

.

a.

If 22 to 28 VDC are present, repair wire 1615 in upper passenger side

body wire harness if repairable (TM 9-2320-325-14&P),

or replace

passenger side body wire harness (WP 0298).

.

b.

If 22 to 28 VDC are not present, repair wire 1615 in lower passenger

side body wire harness if repairable (TM 9-2320-325-14&P), or replace

passenger side body wire harness (WP 0298).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION