TM 9-2320-328-13&P-1
0111-6
DRAFT
0111
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HTW3159
.
NOTE
Driver side and passenger side body harness checked same way.
Driver side body wire
harness shown.
.
Step 7.
Remove skid plate grille (WP 0349).
Disconnect main wire harness main 2 connector.
Disconnect main wire harness from either driver side body or passenger side body wire
harness connector.
With a test lead set, check for continuity across main wire harness
wire 1144 (blue) from main 2 connector, terminal V to driver side body or passenger
side body wire harness connector, terminal A.
.
a.
If there is continuity, repair wire 1144 in cab instrument panel wire
harness if repairable (TM 9-2320-325-14&P), or replace cab instrument
panel wire harness (WP 0279).
.
b.
If there is no continuity, repair wire 1144 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION