TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1265 of 1318

TM 9-2320-328-13&P-1

0111-9

DRAFT

0111

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3315

.

Step 10.

Re-install scene lights to original positions (WP 0233). Disconnect passenger side body

wire harness rear scene light connector.

Check for 22 to 28 VDC between passenger

side body wire harness wire 1144 (blue) at scene light connector, terminal A and a

known good ground.

.

If 22 to 28 VDC are not present, go to Step 13.

.

Step 11.

Put REAR SCENE switch to off position (WP 0004).

Turn Service Drive Lights Off

(TM 9-2320-422-10).

Pull battery disconnect switch to off position (WP 0007).

Check

for continuity across wire 2740 (black) from passenger side body wire harness rear

scene light connector, terminal B to a known good ground.

.

If there is continuity, replace passenger side rear scene light (WP 0233).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION