TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1271 of 1318

TM 9-2320-328-13&P-1

0111-15/(16 blank)

DRAFT

0111

Change 1

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3185

.

WARNING

.

ICON 30, 44, 27

.

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

.

Step 18.

Disconnect main wire harness driver side body wire harness connector.

With a test

lead set, check for 22 to 28 VDC between main wire harness wire 1144 (blue) from

driver side body wire harness connector, terminals A to a known good ground.

.

a.

If 22 to 28 VDC are present, repair wire 1144 in driver side body wire

harness if repairable (TM 9-2320-325-14&P), or replace driver side

body wire harness (WP 0286).

.

b.

If 22 to 28 VDC are not present, repair wire 1144 in main wire harness if

repairable (TM 9-2320-325-14&P), or replace main wire

harness (WP 0292).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION