TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1278 of 1318

TM 9-2320-328-13&P-1

0112-6

DRAFT

0112

HWT1340

Step 10.

Pull battery disconnect switch to off position (WP 0007). Cut cab roof wire harness cab

dome light butt splice connector wire 1047 (red) at driver side cab dome light. With a

test lead set, check for continuity across wire 1047 (red) from cab roof wire harness cab

dome light termination to cab instrument panel wire harness, terminal 20.

If there is continuity, go to Step 12.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION