TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 335 of 1318

TM 9-2320-328-13&P-1

0049-3

DRAFT

0049

Change 1

..

HWT1084

..

Step 6.

If operating from pump operator’s panel, check if pressure governor control displays

Throttle Ready (WP 0017).

..

If Throttle Ready is not displayed, go to Step 8.

..

Step 7.

Check if PUMP PTO switch is in on position (WP 0004).

..

..

..

..

..

..

..

..

CAUTION

Engine must be at idle before engaging PTO.

Failure to comply will result in

damage to PTO and/or transmission.

..

a.

If PUMP PTO switch is not in on position, put PUMP PTO switch to on

position (WP 0004).

..

b.

If PUMP PTO switch is in on position, notify Supervisor.

..

Step 8.

Check if pressure governor control displays High Idle Not Engaged (WP 0017).

..

If High Idle Not Engaged indicator is displayed, go to Step 11.

..

Step 9.

Check if transmission selector is in N neutral (TM 9-2320-422-10).

..

If transmission selector is not in N neutral, select N neutral

(TM 9-2320-422-10).

..

Step 10.

Check if parking brakes are applied (TM 9-2320-422-10).

..

a.

If parking brakes are not applied, apply parking brakes

(TM 9-2320-422-10).

..

b.

If parking brakes are applied, notify Supervisor.

..

..

..

..

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION