TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 619 of 1318

TM 9-2320-328-13&P-1

0069-11

DRAFT

0069

Change 1

..

HWT0897

..

Step 13.

Connect No. 2 passenger side discharge valve control wire harness connector to No. 2

passenger side discharge valve motor.

Disconnect No. 1 driver side discharge valve

control wire harness connector from NO. 1 DRIVER SIDE DISCHARGE valve control.

Connect No. 2 passenger side discharge valve control wire harness connector to NO. 1

DRIVER SIDE DISCHARGE valve control.

While an assistant pushes pump operator’s

panel NO. 1 DRIVER SIDE DISCHARGE valve control OPEN and CLOSE buttons

(WP 0004), check if No. 2 passenger side discharge valve operates.

..

a.

If No. 2 passenger side discharge valve operates, reconnect valve

control wire harness connectors to original positions and replace NO. 2

PASSENGER SIDE DISCHARGE valve control (WP 0210).

..

b.

If No. 2 passenger side discharge valve does not operate, reconnect

valve control wire harness connectors to original positions and replace

No. 2 passenger side discharge valve motor (WP 0248).

..

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION