TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 631 of 1318

TM 9-2320-328-13&P-1

0070-5

DRAFT

0070

Step 7.

Pull battery disconnect switch to off position (WP 0007).

Reconnect valve control wire

harnesses to original positions.

Remove passenger side auxiliary inlet valve (WP 0186)

and inspect it for binding, damage, and contamination.

a.

If passenger side auxiliary inlet valve is free from binding, damage, and

contamination, reinstall valve (WP 0186) and replace passenger side

auxiliary inlet valve motor and drive assembly (WP 0248).

b.

If passenger side auxiliary inlet valve is not free from binding, damage,

and/or contamination, repair (WP 0249) or replace passenger side

auxiliary inlet valve (WP 0186).

HWT1433

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 8.

Pull battery disconnect to off position (WP 0007).

Open pump operator’s

panel (WP 0207).

Check passenger side auxiliary inlet valve control wire harness from

PASSENGER SIDE AUX. INLET valve control to passenger side auxiliary inlet valve

motor for loose connections.

Reconnect loose passenger side auxiliary inlet valve control

wire harness

connectors (WP 0285).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION