TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 633 of 1318

TM 9-2320-328-13&P-1

0070-7

DRAFT

0070

HWT0833

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 10.

Pull battery disconnect switch to off position (WP 0007).

Disconnect valve control wire

harness connectors from PASSENGER SIDE AUX. INLET valve control and passenger

side auxiliary inlet valve motor.

With a test lead set, check for continuity across

passenger side auxiliary inlet valve control wire harness valve control to passenger side

auxiliary inlet valve motor connector, terminal to terminal.

If there is no continuity, repair wires

if repairable (TM 9-2320-325-14&P), or

replace passenger side auxiliary inlet valve control wire harness (WP 0285).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION