TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 865 of 1318

TM 9-2320-328-13&P-1

0076-27/(28 blank)

DRAFT

0076

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT1745

Step 39.

Install circuit breaker 11 (WP 0242).

Disconnect cab pump control wire harness cab

power distribution wire harness connector.

With a test lead set, check for continuity

across cab pump control wire harness wire 2854 (red) from TANK TO PUMP switch

connector, terminal 5 to cab pump control wire harness connector, terminal A.

a.

If there is continuity, repair wire 2854 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P),

or replace cab power

distribution wire harness and block (WP 0280).

b.

If there is no continuity, repair wire 2854 in cab pump control wire

harness if repairable (TM 9-2320-325-14&P), or replace cab pump

control wire harness (WP 0281).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION