TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 893 of 1318

TM 9-2320-328-13&P-1

0079-11/(12 blank)

DRAFT

0079

Change 1

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

.

HWT1067A

.

Step 12.

Pull battery disconnect switch to off position (WP 0007).

Disconnect cab power

distribution wire harness cab instrument panel wire harness connector.

With a test lead

set, check for continuity across cab instrument panel wire harness wire 2700 (red) from

cab instrument panel wire harness connector, terminal 11 to PUMP PTO switch

connector, terminal 5.

.

a.

If there is continuity, repair wire 2700 in cab power distribution wire

harness if repairable (TM 9-2320-325-14&P), or replace cab power

distribution wire harness and block (WP 0280).

.

b.

If there is no continuity, repair wire 2700 in cab instrument panel wire

harness if repairable (TM 9-2320-325-14&P), or replace cab instrument

panel wire harness (WP 0279).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION