TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009
TM-9-2320-328-13-P-1

  TM-9-2320-328-13-P-1 - Page 957 of 1318

TM 9-2320-328-13&P-1
0085-17
DRAFT
0085
HWT1395A
Step 21.
Put WINDSHIELD DELUGE switch to off position (WP 0004).
Pull battery disconnect
switch to off position (WP 0007).
Disconnect main wire harness pump house wire
harness connector.
With a test lead set, check for continuity across pump house wire
harness wire 2769 (red) from pump house wire harness pump house power distribution
wire harness connector DP2, terminal A to main wire harness pump house wire harness
connector terminal 16.
If there is no continuity, repair wire 2769 in pump house wire harness if
repairable (TM 9-2320-325-14&P), or replace pump house wire
harness (WP 0302).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top