TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 961 of 1318

TM 9-2320-328-13&P-1

0085-21

DRAFT

0085

END OF TASK

HWT2877

WARNING

ICON 3

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

Step 25.

Disconnect pump house wire harness power distribution wire harness connector DP2.

With a test lead set, check for continuity across pump house wire harness wire 1065

(pink) from pump house wire harness connector DP2, terminal K to pump house wire

harness windshield deluge pump connector, terminal 1.

a.

If there is continuity, repair wire 1065 in pump house power distribution

wire harness if repairable (TM 9-2320-325-14&P), or replace pump

house power distribution wire harness and block (WP 0299).

b.

If there is no continuity, repair wire 1065 in pump house wire harness if

repairable ((TM 9-2320-325-14&P), or replace pump house wire

harness (WP 0302).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION