TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 975 of 1318

TM 9-2320-328-13&P-1

0086-13/(14 blank)

DRAFT

0086

END OF TASK

FOLLOW-ON MAINTENANCE

Remove wheel chocks (TM 9-2320-422-10)

END OF TASK

END OF WORK PACKAGE

HWT1244

Step 19.

Disconnect cab instrument panel wire harness cab power distribution wire harness

connector.

With a test lead set, check for 22 to 28 VDC between cab instrument panel

wire harness wire H052 (white) at cab instrument panel wire harness connector,

terminal 15 and a known good ground.

a.

If 22 to 28 VDC are present, repair wire H052 in cab power distribution

wire harness if repairable (TM 9-2320-325-14&P), or replace cab

power distribution wire harness and block (WP 0280).

b.

If 22 to 28 VDC are not present, repair wire H052 in cab instrument

panel wire harness if repairable

(TM 9-2320-325-14&P), or replace

cab instrument panel wire harness (WP 0279).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION