TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1073 of 1390

TM 9-2320-328-13&P-2

0286-7

DRAFT

0286

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

18. With the aid of an assistant, remove lower driver side body wire harness (33) from onboard water tank (34),

routing harness into driver side rear light bezel box (35).

19. Remove lower driver side body wire harness (33) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Install cable ties and cushion clips as required.

•

Perform Steps (1) through (13) if lower driver side body wire harness was removed.

1.

Position lower driver side body wire harness (33) on vehicle.

2.

With the aid of an assistant, route lower driver side body wire harness (33) through onboard water tank (34).

3.

Connect lower driver side body wire harness connector (31) on main wire harness connector (32).

HWT1888A