TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1070 of 1390

TM 9-2320-328-13&P-2

0286-4

DRAFT

0286

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.

Route upper driver side body wire harness (11) through hose bed assembly (12) and remove upper driver side

body wire harness (11) from vehicle.

NOTE

•

Perform Step (7) through (19) to remove lower driver side body wire harness from vehicle.

•

Perform Step (7) only if lower driver side body wire harness connector needs to be

disconnected from upper driver side body wire harness connector.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.

Disconnect upper driver side body wire harness connector (9) from lower driver side body wire harness

connector (10).

HWT1883A

HWT1884A