TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1060 of 1390

TM 9-2320-328-13&P-2

0284-2

DRAFT

0284

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

The aid of an assistant may be required to remove discharge valve control wire harness.

2.

Disconnect discharge valve control wire harness connector (3) from discharge line connector (4) and remove

discharge valve control wire harness (5) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Driver side and passenger side discharge valve control wire harnesses are installed the

same way.

Driver side shown.

•

Install split loom, cushion clips, and cable ties as noted prior to removal.

•

Route discharge valve control wire harness as noted prior to removal.

1.

Connect discharge valve control wire harness connector (3) to discharge line connector (4) and route

discharge valve control wire harness (5) on vehicle.

HWT2833