TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1059 of 1390

TM 9-2320-328-13&P-2

0284-1

DRAFT

0284

FIELD LEVEL MAINTENANCE

DISCHARGE VALVE CONTROL WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Discharge valve control wire harnesses are routed from pump house to pump operator’s

panel assembly.

•

Note position and remove split loom, cushion clips, and cable ties as required.

•

Note routing of discharge valve control wire harness prior to removal to ensure proper

installation.

•

Tag and mark connectors prior to removal to ensure proper installation.

•

Driver side and passenger side discharge valve control wire harnesses are removed the

same way.

Driver side shown.

1.

Disconnect discharge valve control wire harness connector (1) from discharge valve control connector (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1934

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0391, Fig. 34

Equipment Conditions

Pump operator’s panel opened (WP 0207)

Pump house panel E or G removed (WP 0339)