TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1057 of 1390

TM 9-2320-328-13&P-2

0283-3/(4 blank)

DRAFT

0283

Change 1

INSTALLATION

NOTE

•

Route direct tank fill valve control wire harness as noted.

•

Install cable ties, cushion clips, and split loom as noted.

1.

Install direct tank fill valve wire harness (7) on vehicle.

2.

Connect direct tank fill valve connector (6) on direct tank fill valve wire harness connector (5).

3.

Connect pump operator’s panel wire harness connector (4) on direct tank fill valve control wire harness

connector (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Connect main wire harness connector (2) on direct tank fill valve wire harness connector (1).

END OF TASK

FOLLOW-ON MAINTENANCE

Install pump house panel K (WP 0339)

END OF TASK

END OF WORK PACKAGE

HWT2370