TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1063 of 1390

TM 9-2320-328-13&P-2

0285-1

DRAFT

0285

FIELD LEVEL MAINTENANCE

DRIVER SIDE AUXILIARY INLET VALVE CONTROL WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Note routing of driver side auxiliary inlet valve control wire harness prior to removal

to

ensure proper installation.

•

Driver side auxiliary inlet valve control wire harness is routed through pump house panel N

and pump operator’s panel assembly.

•

Note position and remove harness split loom, cushion clips, and cable ties as required.

•

Tag and mark connectors prior to removal to ensure proper installation.

1.

Disconnect driver side auxiliary inlet valve wire harness connector (1) from driver side auxiliary inlet valve

control connector (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1938

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

References

WP 0391, Fig. 53

Equipment Conditions

Pump operator’s panel opened (WP 0207)

Pump house panel E removed (WP 0339)