TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1067 of 1390

TM 9-2320-328-13&P-2

0286-1

DRAFT

0286

Change 1

FIELD LEVEL MAINTENANCE

DRIVER SIDE BODY WIRE HARNESS REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Perform Steps (1) through (6) to remove upper driver side body wire harness from vehicle.

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of upper driver side body wire harness prior to removal to ensure proper

installation.

•

Note position and remove cable ties, split loom, and cushion clips as required.

1.

Disconnect scene light connector (1) from upper driver side body wire harness connector (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1879

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0391, Fig. 53

Equipment Conditions

Driver side top stowage compartment door

opened for upper driver side body wire

harness (WP 0008)

Front and rear driver side light bezel covers

removed for upper driver side body wire

harness (WP 0335)

Driver side lower rear stowage compartment

removed for lower driver side body wire

harness (WP 0356)

Rear driver side light bezel cover removed for

lower driver side body wire

harness (WP 0335)