TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1051 of 1390

TM 9-2320-328-13&P-2

0282-3

DRAFT

0282

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

6.

Disconnect cab instrument panel wire harness connector (15) from cab roof wire harness connector (16).

7.

Remove cab roof wire harness (7) from vehicle.

END OF TASK

INSTALLATION

NOTE

•

Install cable ties, split loom, and cushion clips as required.

•

Route cab roof wire harness as noted prior to removal.

1.

Install cab roof wire harness (7) on vehicle.

2.

Connect cab instrument panel wire harness connector (15) on cab roof wire harness connector (16).

3.

Install bracket (12) on cab dash assembly (14) with two screws (13) and locknuts (11).

4.

Repair cab roof wire harness (7) wire 1640 (10) on cab roof lightbar cable assembly connector (9)

(TM 9-2320-325-14&P)

5.

Repair cab roof wire harness (7) wire 1626 (8) on cab roof lightbar cable assembly connector (9)

(TM 9-2320-325-14&P)

HWT2552A