TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1084 of 1390

TM 9-2320-328-13&P-2

0288-2

DRAFT

0288

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Remove nut (5), lockwasher (6), two washers (7), screw (8), ground strap (9), ground cable (10), and wire

1100 (11) from bracket (12) and pump house frame (13).

Discard lockwasher.

3.

Remove screw (14) and ground strap (9) from pressure governor ECU (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove four locknuts (15), eight washers (16), four screws (17), and pressure governor ECU (4) from

bracket (12).

Discard locknuts.

NOTE

Perform Steps (5) and (6) if bracket needs to be removed.

5.

Remove four locknuts (18), lockwashers (19), washers (20), screws (21), and pressure governor ECU service

connector (22) from bracket (12).

Discard locknuts and lockwashers.

HWT3408

HWT3409