TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 1089 of 1390

TM 9-2320-328-13&P-2

0289-1

DRAFT

0289

FIELD LEVEL MAINTENANCE

INTERCOM WIRE HARNESS REPLACEMENT

INITIAL SETUP:

SINCGARS INTERFACE WIRE HARNESS REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Note routing of intercom wire harness prior to removal to ensure proper installation.

•

Note position and remove cable ties, split loom, and cushion clips as required.

1.

Remove SINCGARS receiver transmitter and power adapter from electronic mounting

base (TM 11-5820-890-10).

2.

Loosen thumbscrew (1) and remove intercom wire harness connector (2) from electronic mounting base (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2379

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

References

TM 9-2320-325-14&P

TM 11-5820-890-10

WP 0391, Fig. 37

Equipment Conditions

Intercom removed (WP 0256)