TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 144 of 1390

TM 9-2320-328-13&P-2

0120-24

DRAFT

0120

HWT2608A

Step 34.

Inspect two-way radio interface wire harness connectors at intercom and two-way radio

for loose connectors.

If two-way radio interface wire harness connectors are loose, tighten

connection (WP 0289),

Step 35.

Remove four screws and lift intercom away from intercom bracket (WP 0256).

Disconnect SINCGARS interface wire harness connector from intercom RADIO B

connector (WP 0289).

Disconnect two-way radio interface wire harness connector from

intercom RADIO A connector (WP 0289).

Connect two-way radio interface wire

harness connector on intercom RADIO B connector.

Press intercom RADIO B button

(WP 0004).

While an assistant monitors two-way radio, check if headset

communications can be heard through two-way radio.

If headset communications can be heard through two-way radio, replace

intercom (WP 0256).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION