TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 145 of 1390

TM 9-2320-328-13&P-2

0120-25

DRAFT

0120

HWT2613

Step 36.

Remove and install two-way radio and SINCGARS interface wire harnesses in original

positions.

Pull battery disconnect switch to off position (WP 0007).

Disconnect two-

way radio interface wire harness connectors from two-way radio and intercom

(WP 0289).

With a test lead set, check for continuity across two-way radio interface

wire harness transmit audio Lo wire (red) from intercom connector, terminal 2 to two-

way radio connector, terminal 4.

If there is no continuity, repair transmit audio Lo wire if repairable

(TM 9-2320-325-14&P), or replace two-way radio interface wire harness

(WP 0289).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION