TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 251 of 1390
TM 9-2320-328-13&P-2
0128-3
DRAFT
0128
PMCS WARNINGS AND CAUTIONS
Always observe the warnings and cautions appearing in your PMCS table.
Warnings and cautions appear before
applicable procedures.
You must observe these warnings and cautions to prevent serious injury to yourself or
prevent equipment being damaged.
EXPLANATION OF TABLE ENTRIES
If an item or component being inspected is inoperable or damaged, either troubleshoot by following instructions in
troubleshooting section of this manual or repair and/or replace as described in related maintenance task.
When doing preventive maintenance, take along tools and supplies needed to make all checks, including a clean
cloth or two.
The following is a breakdown of the PMCS table:
1.
Item No. Column.
Checks and services are numbered in a logical order for moving around the vehicle.
2.
Interval Column.
This column identifies when the PMCS should be performed.
(a)
Perform (A-After Operations) checks right after operating vehicle.
(b)
Perform (D-During Operations) checks during operation of vehicle.
(c)
Perform (W-Weekly) checks weekly.
(d)
Perform (M-Monthly) checks monthly.
3.
Item To Be Inspected Procedure Column.
This column identifies item to be inspected and contains all
information required to do check/inspection.
A digital photo is supplied to aid user in identifying items.
Whenever replacement is recommended, reference is made to applicable maintenance instructions.
4.
Not Mission Capable If Column.
This column contains a brief statement of condition that would cause
vehicle to be less than fully ready to perform its assigned mission.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -
-
-
-
-
-
-
-
-
-
-
Back to Top
