TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009
TM-9-2320-328-13-P-2

  TM-9-2320-328-13-P-2 - Page 245 of 1390

TM 9-2320-328-13&P-2
0127-25/(26 blank)
DRAFT
0127
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
HWT2872
Step 35.
Disconnect main wire harness pump house wire harness connector. With a test lead
set, check for continuity across pump house wire harness wire 2852 (red) from main
wire harness pump house wire harness connector, terminal 25 to pump house wire
harness pump house heater diagnostic module connector, terminal A.
a.
If there is continuity, repair wire 2852 in main wire harness if repairable
(TM 9-2320-325-14&P), or replace main wire harness (WP 0292).
b.
If there is no continuity, repair wire 2852 in pump house wire harness if
repairable (TM 9-2320-325-14&P), or replace pump house wire
harness (WP 0302).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top