TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 309 of 1390

TM 9-2320-328-13&P-2

0131.1-1

DRAFT

0131.1

Change 1

FIELD LEVEL MAINTENANCE

STATIC PUMP IDLE PRESSURE ADJUSTMENT

INITIAL SETUP:

ADJUSTMENT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Prime water pump from pump operator’s panel (WP 0016).

2.

Observe static idle pressure on home screen Pump Discharge display.

NOTE

Static idle pressure must be at least 30 psi (207 kPa).

If static idle pressure is not at least

30 psi (207 kPa), perform Steps (3) through (16).

3.

From home screen, press back button and go to Main Menu display.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT3457

References

WP 0016

Equipment Conditions

Engine OFF (TM 9-2320-422-10)

Wheels chocked (TM 9-2320-422-10)