TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009
TM-9-2320-328-13-P-2

  TM-9-2320-328-13-P-2 - Page 370 of 1390

TM 9-2320-328-13&P-2
0142-2
DRAFT
0142
REMOVAL
1.
Disconnect pump house wire harness connector (1) from hydraulic override manifold connector (2).
NOTE
•
Position suitable drain pan under hoses to catch hydraulic fluid.
•
Cap and plug hoses upon removal.
•
Hoses 3, 6, and 9 have the same hose number.
•
Tag and mark hoses prior to removal to ensure proper installation.
2.
Remove hose 1682914 (3) and preformed packing (4) from fitting (5).
Discard preformed packing.
3.
Remove hose 1682914 (6) and preformed packing (7) from fitting (8).
Discard preformed packing.
4.
Remove hose 1682914 (9) and preformed packing (10) from fitting (11). Discard preformed packing.
HWT2940


Back to Top