TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 48 of 1390
TM 9-2320-328-13&P-2
0114-8
DRAFT
0114
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3168
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 11.
Pull battery disconnect switch to off position (WP 0007).
Disconnect main wire harness
passenger side body wire harness connector.
Push battery disconnect switch to on
position (WP 0007).
With a test lead set, check for 10 to 14 VDC between wire 2075
(red) from main wire harness passenger side body wire harness connector, terminal 14
to a known good ground.
.
If 10 to 14 VDC are not present, repair wire 2075 in passenger side body
wire harness if repairable (TM 9-2320-325-14&P), or replace passenger
side body wire harness (WP 0298).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
