TM-9-2320-328-13-P-2
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3
MARCH 2009
TM-9-2320-328-13-P-2 - Page 49 of 1390
TM 9-2320-328-13&P-2
0114-9/(10 blank)
DRAFT
0114
Change 1
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3169
.
Step 12.
Pull battery disconnect switch to off position (WP 0007).
Disconnect main wire harness
main 1 connector.
With a test lead set, check for continuity across wire 2075 (red) from
main wire harness main 1 connector, terminal 18 to main wire harness passenger side
body wire harness connector, terminal 14.
.
a.
If there is continuity, repair wire 2075 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0280).
.
b.
If there is no continuity, repair wire 2075 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0292).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
