TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 496 of 1390

TM 9-2320-328-13&P-2

0165-2

DRAFT

0165

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove locknut (8) and wire 2774 (9) from stud (10).

Discard locknut.

5.

Remove locknut (11) and high amperage cable (12) from stud (13).

Discard locknut.

6.

Remove locknut (14) and wire (15) from stud (16). Discard locknut.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Note position of washers prior to removal to ensure proper installation.

7.

Remove two nuts (17), lockwashers (18), four washers (19), two screws (20), and primer pump (7) from

bracket (21).

Discard lockwashers.

HWT0055

HWT0060