TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 505 of 1390

TM 9-2320-328-13&P-2

0167-1

DRAFT

0167

FIELD LEVEL MAINTENANCE

PRIMER VALVE CABLE REPLACEMENT

INITIAL SETUP:

REMOVAL

1.

Straighten cable wire (1).

NOTE

Note position of cable on bracket prior to removal to ensure proper installation.

2.

Remove two nuts (2), lockwasher (3), four washers (4), two screws (5), cushion clips (6), and cable (7) from

bracket (8).

Discard lockwashers.

3.

Remove screw (9), washer (10), and retainer (11) from lever (12).

4.

Remove cable wire (1) from retainer (11).

NOTE

•

Note routing of cable in pump house prior to removal to ensure proper installation.

•

Remove cable ties as required.

5.

Remove cable (7) from vehicle.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2785

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (2)

References

WP 0391, Fig. 18

Equipment Conditions

Manual primer handle removed (WP 0164)

Pump house panel K removed (WP 0339)