TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 508 of 1390

TM 9-2320-328-13&P-2

0168-2

DRAFT

0168

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove nut (10) and wire 4064 (11) from stud (12).

5.

Remove two nuts (13), lockwashers (14), four washers (15), two screws (16), and solenoid (17) from

bracket (18).

Discard lockwashers.

END OF TASK

INSTALLATION

1.

Install solenoid (17) on bracket (18) with two screws (16), four washers (15), two lockwashers (14), and

nuts (13).

2.

Install wire 4064 (11) on stud (12) with nut (10).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2788A