TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 511 of 1390

TM 9-2320-328-13&P-2

0169-1

DRAFT

0169

FIELD LEVEL MAINTENANCE

PRIMER VALVE REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Tag and mark wires and hoses prior to removal to ensure proper installation.

1.

Remove locknut (1), washer (2), and wire 4065 (3) from stud (4).

Discard locknut.

2.

Remove screw (5), lockwasher (6), and ground wire 4068 (7) from primer valve (8).

Discard lockwasher.

3.

Remove line (9) from elbow (10).

4.

Remove line (11) from elbow (12).

5.

Remove line (13) from fitting (14).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2789

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Compound, Sealing, Pipe Thread

(WP 0400, Item 11)

Tags, Identification (WP 0400, Item 23)

Locknut (1)

Lockwasher (1)

Materials/Parts (continued)

Locknut (4)

Lockwasher (2)

References

WP 0391, Fig. 18, 71

Equipment Conditions

Primer valve cable removed from primer

valve (WP 0167)