TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 552 of 1390

TM 9-2320-328-13&P-2

0180-2

DRAFT

0180

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Remove three couplings (5), (6), and (7) from vehicle (WP 0313).

3.

Remove two locknuts (8), U-bolt (9), cradle (10), and foam system inlet check valve (11) from bracket (12).

Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Note position of supply/drain weldment on check valve prior to removal to ensure proper

installation.

4.

Remove supply/drain weldment (13) and nipple (14) from foam system inlet check valve (11).

END OF TASK

HWT1702

HWT1703