TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 553 of 1390

TM 9-2320-328-13&P-2

0180-3/(4 blank)

DRAFT

0180

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

Install supply/drain weldment on check valve as noted prior to removal.

1.

Apply sealing compound to threads of supply/drain weldment (13) and nipple (14).

2.

Install nipple (14) and supply/drain weldment (13) on foam system inlet check valve (11).

3.

Install foam system inlet check valve (11) on bracket (12) with cradle (10), U-bolt (9), and two locknuts (8).

4.

Install three couplings (7), (6), and (5) on vehicle (WP 0313).

5.

Install U-bolt (2) on bracket (4) and pipe (3) with two locknuts (1).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Open foam system service valve (WP 0004)

2.

Install hose reel (WP 0247)

END OF TASK

END OF WORK PACKAGE

WARNING

ICON 30, 44, 27

HWT1701