TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 619 of 1390

TM 9-2320-328-13&P-2

0194-1

DRAFT

0194

Change 1

FIELD LEVEL MAINTENANCE

WATER TANK CRADLE REPLACEMENT

INITIAL SETUP:

REMOVAL

1.

Disconnect side marker light wire harness (1) from side marker light (2).

2.

Remove four screws (3), lockwashers (4), washers (5), and bracket (6) from water tank cradle (7).

Discard

lockwashers.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1323

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Adhesive, Spray (WP 0400, Item 5)

Lockwasher (4)

Locknut (2)

Lockwasher (2)

Locknut (1)

Locknut (18)

Locknut (1)

Locknut (2)

Locknut (1)

Lockwasher (1)

Lockwasher (14)

Personnel Required

MOS 63B Wheeled Vehicle Mechanic (2)

References

WP 0391, Fig. 25

Equipment Conditions

Water tank removed (WP 0193)

Wheel chocks stowage compartment removed

(WP 0365)

Pump operator’s panel removed (WP 0208)

Stowage compartment (lower front passenger

side) removed (WP 0354)

Stowage compartment (lower rear passenger

side) removed (WP 0357)

Stowage compartment (lower rear driver side)

removed (WP 0356)

Portable ladder (folding) unstowed (WP 0013)