TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 622 of 1390

TM 9-2320-328-13&P-2

0194-4

DRAFT

0194

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Note position of rubber tank padding strips prior to removal to ensure proper installation.

•

Three rubber tank padding strips are held in place with screws.

•

Six rubber tank padding strips are held in place with adhesive.

7.

Remove nine screws (24) and three rubber tank padding strips (25) from water tank cradle (7).

8.

Remove six rubber tank padding strips (26) and two rubber tank padding strips (27) from water tank cradle (7).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3356