TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 629 of 1390

TM 9-2320-328-13&P-2

0194-11

DRAFT

0194

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Install washers as noted prior to removal.

•

Screw threads must have 0.75 in. (1.91 cm) or seven threads showing.

11. Install 18 screws (22), 36 washers (21), 18 springs (20), and locknuts (19) on six frame rail mounting

brackets (23) and water tank cradle (7).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

12. Install pump house heater fuel pump bracket (18) on water tank cradle (7) with screw (17), and locknut (16).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3355

HWT3051