TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 637 of 1390

TM 9-2320-328-13&P-2

0196-3

DRAFT

0196

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (5) and (6) if side warning light flasher unit needs to be removed.

5.

Disconnect cab instrument panel wire harness connector (14) from side warning light flasher unit wire

connector (15).

6.

Remove two locknuts (16), nylon washers (17), screws (18), and side warning light flasher unit (19) from cab

instrument panel A (7).

Discard locknuts.

NOTE

Perform Steps (7) and (8) if front and rear warning light flasher unit needs to be removed.

7.

Disconnect cab instrument panel wire harness connector (20) from front and rear warning light flasher unit

wire connector (21).

8.

Remove two locknuts (22), nylon washers (23), screws (24), and front and rear warning light flasher unit (25)

from cab instrument panel A (7).

Discard locknuts.

END OF TASK

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3365