TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 641 of 1390

TM 9-2320-328-13&P-2

0197-1

DRAFT

0197

FIELD LEVEL MAINTENANCE

CAB PRESSURE GOVERNOR CONTROL REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Remove two screws (1), lockwashers (2), and cover (3) from pressure governor control (4).

Discard

lockwashers.

2.

Loosen screw (5) and disconnect pressure governor control connector (6) from pressure governor control (4).

3.

Loosen knob (7) and remove pressure governor control (4) from pressure governor control base (8).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT2796

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Lockwasher (2)

Locknut (3)

References

WP 0391, Fig. 26

Equipment Conditions

Batteries disconnected (TM 9-2320-325-14&P)