TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 638 of 1390

TM 9-2320-328-13&P-2

0196-4

DRAFT

0196

Change 1

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Install cable ties as required.

•

Perform Steps (1) and (2) if front and rear warning light flasher unit was removed.

1.

Install front and rear warning light flasher unit (25) on cab instrument panel A (7) with two screws (24), nylon

washers (23), and locknuts (22).

2.

Connect front and rear warning light flasher unit wire connector (21) to cab instrument panel wire harness

connector (20).

NOTE

Perform Steps (3) and (4) if side warning light flasher unit was removed.

3.

Install side warning light flasher unit (19) on cab instrument panel A (7) with two screws (18), nylon

washers (17), and locknuts (16).

4.

Connect side warning light flasher unit wire connector (15) to cab instrument panel wire harness

connector (14).

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3365