TM 9-2320-328-13&P-2
0194-10
DRAFT
0194
Change 1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
•
Install rubber tank padding as noted prior to removal.
•
Three rubber tank padding strips are held in place with screws.
•
Six rubber tank padding strips are held in place with adhesive.
7.
Install two rubber tank padding strips (27) on water tank cradle (7).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away
from open fire and use in well-ventilated area.
If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
8.
Apply adhesive to six rubber tank padding strips (26).
9.
Install six rubber tank padding strips (26) on water tank cradle (7).
10. Install three rubber tank padding strips (25) on water tank cradle (7) with nine screws (24).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3356
WARNING
ICON 30, 44, 27